How to read this table
Each row is one pro's current setup. DPI is the hardware setting on the mouse. Hz is the polling rate — how often the mouse reports its position each second. eDPI is DPI × in-game sensitivity, the only number that lets you compare two players fairly in the same game. Click any row to expand the full setup: in-game sensitivity, zoom sensitivity, Windows pointer speed, complete crosshair parameters with a copyable share code, viewmodel offsets, launch options and a short bio — all taken from the player's own public config.
DPI and polling rate: 96% run 400 or 800
Of the 71 pros, 34 run 400 DPI and 34 run 800 DPI; two run 1,600 and one runs 900. The reason is sensor behaviour, not tradition: 400 and 800 sit comfortably inside a modern sensor's native resolution window, so there is no firmware interpolation smoothing your input. Crank a sensor to its maximum CPI and it starts measuring mousepad texture as movement — the cursor twitches when you aren't touching it. Polling rate is where players have started to diverge: 62% still run 1,000 Hz, while 21% are on 2,000 Hz and 15% on 4,000 Hz, with one player at 8,000 Hz. Higher rates shrink the gap between where your crosshair is and where the server thinks it is — most valuable for very low-sensitivity arm players — at the cost of CPU load and battery life.
The eDPI band is narrower than you think
eDPI across the dataset runs from 377 to 1,240 — but the extremes are one player each. The middle is dense: P25 is 720, the median is 800, P75 is 960, and 82% of players sit inside 600–1,000. Practically: if you're anywhere between 700 and 950 eDPI, you're in the same neighbourhood as the players in this table — no reason to change for the sake of it. Above ~1,200 or below ~500 you're an outlier; fine if it works, but worth understanding before muscle memory sets. Check where you land in the eDPI calculator.
Should you copy a pro’s sensitivity?
Mostly no — and here's the honest reasoning. Sensitivity is a function of pad size, desk height, arm length and how you move; all of those are yours, not theirs. What is worth copying is the shape of the decision, not the number. 66 of these 71 players keep Windows pointer speed at 6/11 — the one setting that applies no acceleration. Almost nobody drops zoom sensitivity below 1. And very few pros change sensitivity once they've settled. Stability is the lesson, not the value. If you want a starting point, take 800 eDPI, play twenty matches, then adjust in ~5% steps. Don't copy m0NESY's 920 and switch to flameZ's 1,200 the same week.
What about the mouse itself?
71 players, 42 different models — but the distribution is not flat. The Logitech G Pro X2 SUPERSTRIKE alone accounts for 12 of them, and counting colourways the G Pro X Superlight family covers a large share of the table. ZOWIE's EC2-DW, the Razer Viper V4 Pro and the DeathAdder V3 HyperSpeed are the other recurring names. The pattern matches the wider database: symmetrical, low-hump shells between 50 and 65 g — the claw-grip default. The ergonomic entries (DeathAdders, EC2s) belong mostly to palm-grip players who want the shell to fill their hand. The mouse matters far less than the fit. Twelve players on one model isn't magic — it's evidence a mid-weight symmetrical shell is a safe default for claw grip. The full 397-model database breaks it all down by the same attributes.
FAQ
What eDPI do most CS2 pros use?
The median across our 71 tracked pros is 800 eDPI, with the middle half between 720 and 960. Anything in 700–950 is entirely normal at the top level.
Why do pros use such a low DPI?
Low DPI keeps the sensor inside its native resolution range — no interpolation, no added jitter — and makes small hand tremors matter less. 400 and 800 have been the standard for over a decade because tracking is cleanest there, not out of nostalgia.
Is a higher polling rate worth it?
Marginal but real: 4,000 Hz over 1,000 Hz cuts the report interval from 1 ms to 0.25 ms. Most of the benefit shows for low-sensitivity players on long swipes. If your PC and battery handle it, there’s no downside — yet 62% of pros still run 1,000 Hz without feeling held back.
Can I import a pro’s crosshair?
Yes. Expand any row, copy the share code, then in CS2 go to Settings → Game → Crosshair → Share or Import and paste it. Crosshair is the most transferable setting on this page — it depends on nothing but preference.
How current is this data?
Last refreshed 2026-09-01. Pros swap mice and tweak settings often, especially around roster moves — treat each entry as a snapshot, not a permanent fact.